California-faucets Roman Tub Sets 73 Series Bedienungsanleitung PDF herunterladen (Seite 2)

"A"

Escutcheon

Sink/

Countertop

Spacer Cup

Fiber Washer

Bottom Nut

Valve

OUTLET

INLET

Install valve bodies

(See Fig. 1 & 3)

7202 Series

"A" = 3/4"

7302 Series

"A" = 1"

Fig. 3

NOTE:

Hot & cold valves are labeled:

RED

= hot &

BLUE

= cold.

-Remove top nut and discard.

-Turn bottom nut with fiber washer down the valve until it stops.

-Place spacer cup onto valve oriented correctly as shown.

-Insert valve through hole from below.

-Attach and thread escutcheon onto threads below stem and

adjust valve to scheduled height "A".

-Place handle onto stem allowing minimal gap between escutcheon and

handle. Tighten setscrews with Allen key provided.

-Align handle in desired position and tighten the bottom nut to secure valve.

NOTE: Align square escutcheon on 7202 Series prior to securing valve.

Piping:

-Use rigid copper piping (not included) to connect hot & cold valves to tee & water supply

(See Fig. 1).

Flexible hoses are not recommended for the following reasons:

1. Hoses may be inaccessible and require occasional replacement;

2. Some trim installations require escutcheon to hold valve in place.

WARNING: To prevent damage to valve all soldering shall be performed before attaching fitting directly to valve.

Any additional soldering should be performed at least 6" away from valve ports.

RT_7208_ii_101220

1 2

Keine Kommentare

California-faucets Roman Tub Sets 73 Series Bedienungsanleitung Seite 2